|
|
|
|
Component and Product Design and Failure AnalysisSummary of Selected Publications"Fault Tree Analysis with Probability Evaluation," Proctor, C.L., Proctor, Charles L., II, Kothari, Ashol M., Proc Annual Reliab Maintainability Symposium, Los Angeles, CA, January 17-191978. "Multistate-Time Dependent System Modeling," Proctor, Charles L., II, Proctor, C.L., Proc Annual Reliab Maintainability Symposium, Philadelphia, PA, January 18-20 1977. "Impact of Variable Acceleration on Stationary Start Calculations for Vehicles," Proctor, Charles L., II, Grimes, W., Fournier, D.J., Jr., Rigol, J., Jr., and Sunseri, M.G., accepted for publication, SAE 1995 Congress and Exposition. "Control of Mercury Emissions from Hazardous Waste Incinerators, "Carroll, G.J., R.C. Thurman, and D.J. Fournier, Jr., to be presented at the Air and Waste Management Association Annual Meeting, Cincinnati, Ohio, June 1994. "Potential Surrogate Metals for Incinerator Trial Burns, "Waterland, L.R., D.J. Fournier, Jr., G.J. Carroll, and M.K. Richards, presented at the 1993 Incineration Conference, Knoxville, TN, May 1993. "Metals Partitioning Resulting from Rotary Kiln Incineration of Hazardous Waste," Richards, M.K. and D.J. Fournier, Jr., presented at the EPA Eighteenth Annual Hazardous Waste Research Symposium, Cincinnati, Ohio, April 1992. "The Fate of Trace Metals in a Rotary Kiln Incinerator: Tests with Two Different Wet Scrubber Systems," Fournier, D.J., Jr., L.R. Waterland, J.W. Lee, G.J. Carroll and R.C. Thurnau, presented at the Western States Section of the Combustion Institute, Los Angeles, California, October 14, 1991. "The Behavior of Trace Metals in Rotary Kiln Incineration: Results of Incineration Research Facility Studies," Fournier, D.J., Jr., L.R. Waterland, J.W. Lee and G.J. Carroll, presented at the EPA Seventeenth Annual Hazardous Waste Research Symposium, Cincinnati, Ohio, April 1991. "Size Distribution of Trace Metals in Flue Gas Particulate from a Pilot-Scale Rotary Kiln Incinerator," Fournier, D.J., Jr. and L.R. Waterland, presented at The American Flame Research Committee International Symposium on NOx Control, Waste Incineration and Oxygen Enriched Combustion, San Francisco, California, October1990. "Trace Metal Fate in a Rotary Kiln Incinerator with an Ionizing Wet Scrubber," Waterland, L.R., D.J. Fournier, Jr., J.W. Lee and G.J. Carroll, presented at the 1990 Incineration Conference, San Diego, California, May 1990. "Parametric Evaluation of Metal Partitioning at the U.S. EPA Incineration Research Facility," Carroll, G.J., D.J. Fournier, Jr. and L.R. Waterland, presented at the EPA Sixteenth Annual Hazardous Waste Research Symposium, Cincinnati, Ohio, April1990. "The Partitioning of Metals in Rotary Kiln Incineration, Carroll, G.J., D.J. Fournier, Jr., R.C. Thurnau, L.R. Waterland, R.E. Mournighan and J.W. Lee, presented at The Third International Conference on New Frontiers for Hazardous Waste Management, Pittsburgh, Pennsylvania, September 1989. "Pilot-Scale Testing to Evaluate the Fate of Trace Metalsin Rotary Kiln Incineration," Fournier, D.J., Jr., L.R. Waterlandand W.E. Whitworth, presented at the 1989 Summer National AIChE Meeting, Philadelphia, Pennsylvania, August 1989. "Incineration Surrogate Rationing Technique," Joshi, S., D.J. Fournier, Jr., C.L. Proctor, II and S. Roychoudhury, presented at the 1988 Incineration Conference, San Francisco, California, May 1988. "An Empirical Correlation Relating Sulfur Hexafluoride Destruction to Mixing Conditions in a Turbulent Diffusion Flame," Fournier, D.J., Jr., C.L. Proctor, II and S. Joshi, presented at the 1987ASME/JSME Thermal Engineering Joint Conference, Honolulu, Hawaii, March 1987. "Correlating the Destruction Removal Efficiency of Hazardous Waste Surrogates and Tracers," Roychoudhury, S., D.J. Fournier, Jr., C.L. Proctor, II and S. Joshi, 86-WA/HT-25, presented at the 1986 ASME Winter Annual Meeting, Anaheim, California, December1986. "Sulfur Hexafluoride Destruction in a Laboratory Turbulent Diffusion Flame," Fournier, D.J., Jr., C.L. Proctor, II,M. Berger and S. Joshi, 86-WA/HT-24, presented at the 1986 ASME Winter Annual Meeting, Anaheim, California, December 1986. |
|
Contact Dr. Proctor at clp@perc.com
Send mail to
info@perc.com with
questions or comments about this web site.
|
